Mercedes-Benz EQC 350 4MATIC 2021, Руководство пользователя

Страница: 128 / 453

Switching on high beam
#
Turn the light switch to the L or Ã
position.
#
Push the combination switch beyond the
point of resistance in the direction of arrow
1 .
When the high beam is activated, the indica‐
tor lamp for low beam L will be deactiva‐
ted and replaced by the indicator lamp for
high beam K .
Switching off high beam
#
Move the combination switch back to its
starting position.
Headlamp flashing
#
Pull the combination switch in the direction
of arrow 3 .
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4 .
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combi‐
nation switch beyond the point of resistance
in the direction of arrow 2 or 4 .
Activating/deactivating the hazard warning
lights
#
Press button 1 .
The hazard warning lights will switch on auto‐
matically if:
R
the airbag has been deployed.
R
the vehicle is heavily braked from a speed of
more than 70 km/h to a standstill.
When you pull away again, the hazard warning
light system will switch off automatically at
approximately 10 km/h. You can also switch off
the hazard warning light system using but‐
ton 1 .
Adaptive functions, MULTIBEAM LED
Intelligent Light System function
The MULTIBEAM LED headlamps adapt to the
driving and weather situation and provide exten‐
ded functions for improved illumination of the
road.
The system comprises the following functions:
R
Active headlamps (
/
page 126)
R
Cornering light (
/
page 126)
R
Motorway mode (
/
page 126)
R
City lighting (
/
page 127)
Light and sight 125