Mercedes-Benz EQC 350 4MATIC 2021, Руководство пользователя

Страница: 69 / 453

Observe the notes under "Suitability of
seats for attaching belt-secured child
restraint systems" (
/
page 61).
O When using a forward-facing child restraint
system in weight category I: remove the
head restraint from the respective seat, if
possible.
After the child restraint system has been
removed, replace the head restraints again
immediately and adjust them correctly.
O
The backrest of the forward-facing child
restraint system must, as far as possible, be
resting on the seat backrest of the front
passenger seat.
O If the head restraint of the child seat cannot
be fully extended when it is installed in the
vehicle, this will result in restrictions on the
maximum size setting for child restraint sys‐
tems in weight category II or III.
Contact with the roof when the head
restraint is fully extended and locked in
place will not result in any restrictions on
use.
O The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be fitted facing the wrong
direction.
O
The child restraint system must not be put
under strain by the head restraint. Adjust
the head restraints as appropriate.
O
Never place objects (e.g. cushions) under or
behind the child restraint system.
#
Set the front passenger seat as far back as
possible and move the seat into the highest
position if possible.
#
Fully retract the seat cushion length adjust‐
ment.
#
Adjust the seat cushion inclination so that
the front edge of the seat cushion is in the
highest position and the rear edge of the
seat cushion is in the lowest position.
#
Set the seat backrest to the most vertical
position possible.
#
Install the child restraint system.
The entire base of the child restraint system
must always rest on the sitting surface of the
front passenger seat.
#
Always make sure that the shoulder belt
strap is correctly routed from the seat belt
outlet of the vehicle to the shoulder belt
guide on the child restraint system.
The shoulder belt strap must be routed for‐
wards and downwards from the seat belt out‐
let.
#
If necessary, adjust the seat belt outlet and
the front passenger seat accordingly.
66 Occupant safety