Mercedes-Benz EQC 350 4MATIC 2021, Руководство пользователя

Страница: 179 / 453

% Vehicles only equipped with a type 2 vehicle
socket for AC charging have no charging
interruption button 3 .
#
Remove the charging cable connector from
the vehicle socket within 30 seconds.
After the 30 seconds have elapsed, the vehi‐
cle socket will be locked again and the charg‐
ing process will resume.
% If you cannot remove the charging cable con‐
nector, repeat the unlocking procedure. If
the charging cable connector is still locked,
contact a qualified specialist workshop.
#
Close the socket cover and the socket flap.
#
Remove the charging cable connector from
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi‐
cle's charging cable safely in the vehicle.
% After the charging cable connector has been
disconnected, the left % indicator lamp
1 on the vehicle socket remains lit for
some time before switching off.
Starting the direct current charging process
(mode 4)
&
DANGER Risk of death when charging at
a damaged socket
The charging process uses high voltage.
If the charging cable, the vehicle socket or
the mains socket are damaged, you could
receive an electric shock.
#
Only use an undamaged charging cable.
#
Avoid mechanical damage such as
crushing, abrading or driving over the
cable.
#
Have a damaged vehicle socket
replaced at a qualified specialist work‐
shop as soon as possible.
#
Never connect the charging cable to a
damaged vehicle socket.
* NOTE Protecting the vehicle from voltage
surges in the mains supply
The vehicle is equipped with an electrical
fuse for voltage surges in the mains supply.
This electrical fuse may be blown during
severe thunderstorms, for example, and may
cause the building's circuit breaker to trip
and the charging process to be interrupted.
These functions help to protect the vehicle.
After the building protection system has
been switched on again, the charging proc‐
ess resumes automatically.
Following an interruption in the power supply
in which the building's circuit breaker is not
tripped, it may take up to ten minutes for the
charging process to resume automatically.
*
NOTE Permissible heat generated by the
charging cable and charging cable con‐
nector
During the charging process, the charging
cable and charging cable connector may heat
up within permissible limit values.
176 Driving and parking