Mercedes-Benz E-class, Руководство оператора

Страница: 53 / 446

#
If necessary, move head restraint 1
upwards (
→
page 87).
#
Fold up cover 2 of Top Tether anchorage
3 .
#
Install the LATCH-type (ISOFIX) child restraint
system with Top Tether. Always comply with
the child restraint system manufacturer's
installation instructions when doing so.
#
Route Top Tether belt 5 under head
restraint 1 between the two head restraint
bars.
#
Hook Top Tether hook 4 of Top Tether belt
5 without twisting into Top Tether anchor‐
age 3 .
#
Tension Top Tether belt 5 . Always comply
with the child restraint system manufactur‐
er's installation instructions when doing so.
#
Fold down cover 2 of Top Tether anchorage
3 .
#
If necessary, move head restraint 1 down‐
wards (
→
page 87). Make sure that you do
not interfere with the correct routing of Top
Tether belt 5 .
Child restraint systems on the front
passenger seat
Notes on child restraint systems on the front
passenger seat
Accident statistics show that children secured in
the rear seats are safer than children secured in
front seats. For this reason, Mercedes-Benz
strongly advises that you install a child restraint
system on a rear seat.
If it is absolutely necessary to install a child
restraint system on the front passenger seat,
always observe the information on the automatic
front passenger air bag shutoff (
→
page 39).
By doing this, you can avoid risks caused by:
R
A child restraint system that is not detected
by the automatic front passenger air bag
shutoff.
R
The unintentionally deactivated front
passenger air bag.
Occupant safety 51