Mercedes-Benz E-class, Руководство оператора

Страница: 336 / 446

Notes on storing wheels
R
After removing wheels, store them in a cool,
dry and preferably dark place.
R
Protect the tires from contact with oil, grease
or fuel.
Preparing the vehicle for a wheel change
Prerequisites
R
The required tire-change tool kit is available.
If your vehicle is not equipped with the tire-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Vehicles with automatic transmission:
shift into position j .
#
Vehicles with AIR BODY CONTROL: set the
normal vehicle level (
→
page 171).
#
Switch off the engine.
#
Make sure that the engine cannot be started.
#
Place chocks or other suitable items under
the front and rear of the wheel that is diago‐
nally opposite the wheel you wish to change.
#
Remove the hub caps if necessary
(
→
page 334).
#
Raise the vehicle (
→
page 335).
Removing and mounting hub caps
Requirements
#
The vehicle is prepared for a wheel change
(
→
page 334).
Plastic hub cap
#
To remove: turn the center cover of the hub
cap counter-clockwise and remove the hub
cap.
#
To mount: make sure that the center cover
of the hub cap is turned counter-clockwise.
#
Position the hub cap and turn the center
cover clockwise until the hub cap engages
physically and audibly.
Aluminum hub cap
#
To remove: position socket 2 on hub cap
1 .
% The socket can be found in the vehicle tool
kit.
#
Position wheel wrench 3 on socket 2 .
#
Using wheel wrench 3 , turn hub cap 1
counter-clockwise and remove it.
334 Wheels and tires