Mercedes-Benz E-class, Руководство оператора, Страница: 144 / 446

garage door can become trapped or struck
by the garage door.
#
When using the integrated garage door
opener, always make sure that nobody
is within the sweep of the garage door.
Only operate the garage door opener on the fol‐
lowing garage doors:
R
Garage doors with a safety stop and revers‐
ing feature.
R
Garage doors which conform to the current
U.S. safety standards.
When programming a garage door opener, park
the vehicle outside the garage.
#
Check if the transmitter frequency of the
remote control has the frequency range of
280 to 868 MHz.
#
Press and hold buttons 1 , 2 or 3 .
Indicator lamp 4 flashes yellow.
% It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
#
Release the previously pressed button.
Indicator lamp 4 continues to flash yellow.
#
Point remote control 5 at a distance of 1 in
(1 cm) to 3 in (8 cm) towards buttons 1 , 2
or 3 .
#
Press and hold button 6 of remote control
5 .
R
Indicator lamp 4 lights up green: pro‐
gramming is finished.
R
Indicator lamp 4 flashes green: pro‐
gramming has been successful. Addition‐
ally, synchronization of the rolling code
must also take place.
R
Indicator lamp 4 goes out, without light‐
ing up green or flashing: repeat the pro‐
cedure.
#
Release button 6 on remote control 5 .
% The remote control for the garage door drive
is not included in the scope of delivery of the
garage door opener.
Synchronizing the rolling code
Prerequisites
R
The garage door system uses a rolling code.
142 Driving and parking