Mercedes-Benz E-class, Руководство оператора

Страница: 349 / 446

#
Do not alter the engine oil or oil filter in
order to achieve longer change intervals
than prescribed.
#
Do not use additives.
#
Have the engine oil changed after the
prescribed intervals.
Further information on engine oils and oil filters:
R
In the Mercedes-Benz Specifications for
Operating Fluids at http://bevo.mercedes-
benz.com (by entering the designation)
R
At a qualified specialist workshop
Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Gasoline engines MB-Freigabe or MB-
Approval
All models 229.5, 229.6
If the engine oils listed in the table are not avail‐
able, you may add a maximum of 1.1 US qt
(1.0 l) of the following engine oils once:
R
Gasoline engines: MB-Freigabe or MB-
Approval 229.1, 229.3 or ACEA A3
Filling capacities
The following values refer to an oil change
including the oil filter.
Model Capacity
E 300 7.4 US qt (7.0 l)
All other models 6.9 US qt (6.5 l)
Notes on brake fluid
Observe the notes on operating fluids
(
→
page 344).
&
WARNING Risk of an accident due to
vapor pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking effect to be
impaired.
#
Have the brake fluid renewed at the
specified intervals.
Have the brake fluid regularly changed at a quali‐
fied specialist workshop.
Only use brake fluid approved by Mercedes-Benz
according to MB-Freigabe or MB-Approval 331.0.
Further information on brake fluid:
R
In the Mercedes-Benz Specifications for
Operating Fluids at http://bevo.mercedes-
benz.com
R
At a qualified specialist workshop
Notes on coolant
Observe the notes on operating fluids
(
→
page 344).
Technical data 347