Mercedes-Benz E 180, Руководство пользователя

Страница: 475 / 492

vehicle's CO
2
emissions are directly related to
fuel consumption and therefore depend on:
R
efficient use of the fuel by the engine
R
driving style
R
other non-technical factors, such as envi-
ronmental influences, road conditions or
traffic flow
You can minimise your vehicle's CO
2
emis-
sions by driving carefully and having it serv-
iced regularly.
The vehicle will use more fuel than usual in
the following situations:
R
at very low outside temperatures
R
in urban traffic
R
on short journeys
R
in mountainous terrain
R
when towing a trailer
i Only for certain countries: you can find
the current consumption and emission val-
ues of your vehicle in the COC documents
(EU CERTIFICATE OF CONFORMITY). These
documents are delivered with your vehicle.
The consumption figures were in each case
based on the currently applicable version:
R
for vehicles that comply with standards
up to and including the EURO 4 standard,
in accordance with EU Directive
80/1268/EEC
R
for vehicles that comply with or exceed
the EURO 5 standard, in accordance with
Regulation (EC) No. 715/2007
Deviations from these values may occur
under normal operating conditions.
AdBlue ®
Important safety notes
Comply with the important safety notes for
service products when handling
AdBlue
®
(
Y
page 469).
AdBlue
®
is a water-soluble fluid for the
exhaust gas aftertreatment of diesel engines.
It is:
R
non-toxic
R
colourless and odourless
R
non-flammable
If you open the AdBlue
®
tank, small amounts
of ammonia vapour may be released.
Ammonia vapours have a pungent odour and
are particularly irritating to the skin, to
mucous membranes and to the eyes. You may
experience a burning sensation in your eyes,
nose and throat. You may also experience
coughing and watery eyes.
Do not inhale any ammonia vapours that may
be released. Only fill the AdBlue
®
tank in well-
ventilated areas.
Low outside temperatures
AdBlue
®
freezes at a temperature of approx-
imately -11 †. The vehicle is delivered from
the factory equipped with an AdBlue
®
pre-
heating system. Winter operation can thus be
guaranteed even at temperatures below
-11 †.
Additives
! Only use AdBlue
®
in accordance with ISO
22241. Do not use additives with AdBlue ®
and do not dilute AdBlue
®
with water. This
may destroy the BlueTEC exhaust gas after-
treatment system.
Purity
! Impurities in AdBlue
®
(e.g. due to other
service products, cleaning agents or dust)
lead to:
R
increased emission values
R
damage to the catalytic converter
R
engine damage
R
malfunctions in the BlueTEC
®
exhaust
gas aftertreatment system
Service products and capacities
473
Technical data
Z