Mercedes-Benz E 180, Руководство пользователя

Страница: 412 / 492

Restarting the tyre pressure loss warn-
ing system
Restart the tyre pressure loss warning system
if you have:
R
changed the tyre pressure
R
changed the wheels or tyres
R
fitted new wheels or tyres
X
Before restarting, make sure that the tyre
pressures are set properly on all four tyres
for the respective operating conditions.
The recommended tyre pressures can be
found in the tyre pressure table on the fuel
filler flap.
The tyre pressure loss warning system can
only give reliable warnings if you have set
the correct tyre pressure. If an incorrect
tyre pressure is set, these incorrect values
will be monitored.
X
Observe the notes in the section on tyre
pressures (
Y
page 407).
X
Make sure that the key is in position 2 in
the ignition lock (
Y
page 177).
X
Press the
=
or
;
button on the steer-
ing wheel to select the
Serv.
menu.
X Press the
9
or
:
button on the steer-
ing wheel to select the Tyre pressure
menu.
X
Press the
a
button.
The Run Flat Indicator active
Restart with OK
message appears in the
multifunction display.
If you wish to confirm the restart:
X
Press the
a
button.
The
Tyre press. now OK?
message
appears in the multifunction display.
X
Press the
9
or
:
button to select
Yes
.
X
Press the
a
button.
The Run Flat Indicator restarted
message appears in the multifunction dis-
play.
After a teach-in period, the tyre pressure
loss warning system will monitor the set
tyre pressures of all four tyres.
If you wish to cancel the restart:
X
Press the
%
button.
or
X When the
Tyre press. now OK?
message
appears, press the
9
or
:
button to
select Cancel .
X Press the
a
button.
The tyre pressure values stored at the last
restart will continue to be monitored.
Tyre pressure monitor
General notes
If a tyre pressure monitor system is fitted, the
vehicle's wheels have sensors fitted that
monitor the tyre pressures in all four tyres.
The tyre pressure monitor warns you if the
pressure drops in one or more of the tyres.
The tyre pressure monitor only functions if
the corresponding sensors are fitted to all
wheels.
Information on tyre pressures is shown in the
multifunction display. After a few minutes of
driving, the current tyre pressure of each tyre
is shown in the
Serv. menu of the multifunc-
tion display.
Example: current tyre pressure display
For further information on displaying this
message, refer to the "Checking the tyre pres-
sure electronically" section (
Y
page 411).
410
Tyre pressure
Wheels and tyres