Mercedes-Benz E 180, Руководство пользователя

Страница: 169 / 492

between the side window and window frame.
There is a risk of injury.
When opening, make sure that nobody is
touching the side window. If someone
becomes trapped, press the
W
switch
immediately to open/close the side window
in the door. The side window stops. To con-
tinue closing the side window, pull on the
W
switch.
X
Convenience closing feature: press and
hold the
g
button until the side win-
dows and the sliding sunroof/panorama
sliding sunroof are closed.
The indicator lamp above the
g
button
lights up. Air-recirculation mode is activa-
ted.
The indicator lamp in the
g
button lights
up. Air-recirculation mode is activated.
If parts of the body are in the closing area
during convenience closing, proceed as fol-
lows:
X
Press the
W
button for opening/closing
the side windows.
The side window stops.
X To then open the side windows, press the
W
button again.
X
Press the
3
button for opening/closing
the sliding sunroof/panorama sliding sun-
roof.
The sliding sunroof/panorama sliding sun-
roof stops.
X
To then open the sliding sunroof/pano-
rama sliding sunroof, pull back on the
3
button.
i
Notes on the automatic reversing func-
tion for:
R
the side window (
Y
page 104)
R
the sliding sunroof (
Y
page 108)
R
the panorama sliding sunroof
(
Y
page 108)
X
Convenience opening feature: press and
hold the
g
button until the side win-
dows and the sliding sunroof/panorama
sliding sunroof are opened. The side win-
dows and the sliding sunroof/panorama
sliding sunroof move back to their original
position.
The indicator lamp above the
g
button
goes out. Air-recirculation mode is deacti-
vated.
i If you open the side windows or the sliding
sunroof/panorama sliding sunroof man-
ually after closing them with the conveni-
ence closing feature, they will remain in this
position when opened using the conveni-
ence opening feature.
Activating/deactivating the residual
heat function
General notes
The residual heat function is only available
with THERMOTRONIC automatic climate con-
trol.
It is possible to make use of the residual heat
of the engine to continue heating the vehicle
for approximately 30 minutes after the engine
has been switched off. The heating time
depends on the temperature that has been
set for the vehicle interior.
Activating/deactivating
X Turn the key to position
0 in the ignition
lock or remove it (
Y
page 177).
X
To activate: press the
Ì
button.
The indicator lamp above the
Ì
button
lights up.
i
If the residual heat function is activated,
the windows may mist up on the inside.
i The blower will run at a low speed regard-
less of the airflow setting.
i If you activate the residual heat function
at high temperatures, only the ventilation
Operating the climate control system
167
Climate control
Z