Mercedes-Benz E 180, Руководство пользователя

Страница: 367 / 492

The active bonnet can reduce the risk of injury
to pedestrians in certain accident situations.
Raising the active bonnet increases the clear-
ance to hard components, such as the engine.
If active bonnet
:
has been triggered, it will
be raised at the back by about 50 mm.
Lids
;
will then no longer rest on housings
=
. The active bonnet is triggered by pyro-
technics.
You can reset a triggered active bonnet your-
self.
Even if the active bonnet has been triggered,
you can still continue driving and have it reset
at a qualified specialist workshop. If you pull
the bonnet release lever, you must reset the
bonnet before driving on.
Resetting
G
WARNING
Certain components in the engine compart-
ment could be very hot, e.g. the engine, the
radiator and parts of the exhaust system.
There is a risk of injury when accessing the
engine compartment.
As far as possible, allow the engine to cool
down and only touch the following compo-
nents.
X Open the bonnet (
Y
page 366).
X
With both hands, lift the bonnet up in the
centre
A
. The bonnet is open wide enough
when both lids of bonnet lifter
;
no longer
move.
If you push the lids back, you will notice
resistance.
X
Release bonnet
:
.
X
Check whether the lids of bonnet lifter
;
are resting on housings
=
(arrow).
X
The lids of bonnet lifter
;
are resting
on the housings: close bonnet
:
(
Y
page 366).
or
X
The lids of bonnet lifter
;
are not rest-
ing on the housings: first, lift up bon-
net
:
on left-hand side
?
and then on
right-hand side
B
. Lift up bonnet
:
until
the respective lid of bonnet lifter
;
no lon-
ger moves.
The lids of bonnet lifter
;
must rest on
housings
=
(arrow).
X
Close bonnet
:
(
Y
page 366).
If you cannot close bonnet
:
or if the
L
symbol appears in the multifunction display,
repeat the steps.
If the bonnet still does not engage correctly
or the
L
symbol appears in the multifunc-
tion display, do not drive any further. Contact
a qualified specialist workshop.
If active bonnet
:
has been triggered, it will
be raised at the back by about 50 mm.
Lids
;
will then no longer rest on housings
Engine compartment
365
Maintenance and care
Z