Mercedes-Benz E 180, Руководство пользователя

Страница: 145 / 492

General notes
You can use this function to set the head-
lamps to change between dipped beam and
main beam automatically. The system recog-
nises vehicles with their lights on, either
approaching from the opposite direction or
travelling in front of your vehicle, and conse-
quently switches the headlamps from main
beam to dipped beam.
The system automatically adapts the dipped-
beam headlamp range depending on the dis-
tance to the other vehicle. Once the system
no longer detects any other vehicles, it
switches on the main-beam headlamps again.
The system's optical sensor is located behind
the windscreen near the overhead control
panel.
Switching Adaptive Highbeam Assist
on/off
:
Main-beam headlamps
;
Turn signal, right
=
Headlamp flasher
?
Turn signal, left
X
To switch on: turn the light switch to
Ã
.
X
Press the combination switch beyond the
pressure point in the direction of
arrow
:
.
The
_
indicator lamp in the multifunc-
tion display lights up when it is dark and the
light sensor activates the dipped-beam
headlamps.
If you are driving at speeds above
25 km/h:
the headlamp range is set automatically
depending on the distance between the
vehicle and other road users.
If you are driving at speeds above approx-
imately 30 km/h and no other road users
are recognised:
the main-beam headlamps are switched on
automatically. The
K
indicator lamp in
the instrument cluster also lights up.
If you are driving at speeds below
25 km/h or other road users are recog-
nised or the roads are adequately lit:
the main-beam headlamps are switched off
automatically. The
K
indicator lamp in
the instrument cluster goes out. the
_
Exterior lighting
143
Lights and windscreen wipers
Z