Mercedes-Benz Coupe GT, Руководство оператора

Страница: 203 / 286

mbrace
7
Important safety notes
!
You must have a license agreement to
activate the mbrace service. Ensure that
your system is activated and ready for use,
and press the ï MB Info call button to
register. If one of these steps is not carried
out, it may not be possible to activate the
system.
If you have questions about the activation,
contact one of the following telephone
hotlines:
R
USA: Mercedes-Benz Customer
Assistance center at
1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
R
Canada: Customer Service at
1-888-923-8367
Shortly after successfully registering with the
mbrace service, a user ID and password will
be sent to you by mail. You can use this
password to log onto the mbrace area under
"Owners Online" at http://
www.mbusa.com
8
.
The mbrace system is available if:
R
it has been activated and is operational
R
the corresponding mobile phone network
is available for transmitting data to the
Customer Center
R
a service subscription is available
R
the starter battery is sufficiently charged
i
Determining the location of the vehicle on
a map is only possible if there is sufficient
GPS reception and the vehicle position can
be forwarded to the Customer Center.
The mbrace system
The mbrace system provides various
services, e.g.:
R
automatic and manual emergency call
R
Roadside Assistance call
R
MB Info call
To adjust the volume during an mbrace call,
proceed as follows:
X
Press the W or X button on the
multifunction steering wheel.
or
X
Use the volume controller of COMAND.
You can find further information and a
description of all available features under
"Owners Online" at http://
www.mbusa.com
9
.
Self-diagnosis of the system
After you have switched on the ignition, the
system carries out a self-diagnosis.
A malfunction in the system has been
detected if one of the following conditions
occurs:
R
the indicator lamp in the SOS button does
not light up during the system self-
diagnosis.
R
the indicator lamp in the F Roadside
Assistance button does not light up during
the system self-diagnosis.
R
the indicator lamp in the ï information
button does not light up during self-
diagnosis of the system.
R
the indicator lamp in the SOS button, the
F Roadside Assistance button or the
ï information button continues to light
up red after the system self-diagnosis.
R
the Tele Tele Aid Aid Inoperative Inoperative or Tele Tele Aid Aid
Not Activated Not Activated message appears in the
multifunction display after the system self-
diagnosis.
7
The system is called TELE AID in Canada.
8 USA only.
9 USA only.
Features
201
Sto
wag
e
an
d
fe
ature
s
Z