Mercedes-Benz Coupe GT, Руководство оператора

Страница: 130 / 286

To ensure that the vehicle is secured against
rolling away unintentionally:
R
the electric parking brake must be applied.
R
the transmission must be in position P.
R
the SmartKey must be in position 0 in the
ignition lock and then removed from the
ignition lock, or the Start/Stop button must
be pressed.
R
on steep uphill or downhill gradients, turn
the front wheels towards the curb.
R
on steep uphill or downhill gradients, the
front axle of an empty vehicle must be
secured, for example with a wheel chock.
R
on steep uphill or downhill gradients, the
rear axle of a laden vehicle must be
additionally secured, for example with a
wheel chock.
Switching off the engine
Important safety notes
G
WARNING
When the engine is switched off, the
transmission shifts into neutral position N.
The vehicle may roll away. There is a risk of
an accident.
After switching off the engine, always switch
to parking position P. Prevent the parked
vehicle from rolling away by applying the
parking brake.
!
Do not open the driver's door while the
vehicle is in motion. At low speeds in
transmission position D or R, park position
P is otherwise engaged automatically. This
can damage the transmission.
i
Observe the display messages in the
instrument cluster.
AMG SPEEDSHIFT DCT 7-speed sports
transmission
X
Shift the transmission to P with the button
in the center console.
Using the Start/Stop button
X
Press the Start/Stop button (
Y
page 113).
The engine stops and all the indicator
lamps in the instrument cluster go out.
X
Apply the electric parking brake.
i
If you switch the engine off with the
transmission in position R or D, the
transmission automatically shifts to N.
If you move the E-SELECT lever to N before
switching off the engine, the transmission
remains for approximately 30 minutes
in N.
If you open the driver's or front-passenger
door during this period, the transmission
automatically shifts to P.
i
The engine can be turned off while the
vehicle is in motion by pressing and holding
the Start/Stop button for about three
seconds.
Using the SmartKey
!
Do not remove the SmartKey while the
vehicle is in motion. At low speeds, park
position P will otherwise be engaged
automatically.
Do not open the driver's door while the
vehicle is in motion. At low speeds,
transmission position P is engaged
automatically.
This can damage the transmission.
X
Turn the SmartKey to position 0 in the
ignition lock and remove it.
The parking lock is activated.
X
Apply the electric parking brake.
i
If you move the E-SELECT lever to N
before switching off the engine, the
transmission remains for approximately
30 minutes in N. If you open the driver's or
front-passenger door during this period,
the transmission automatically shifts to P.
128
Parking
Driving
and
parking