Mercedes-Benz Coupe GT, Руководство оператора

Страница: 99 / 286

you use an authorized Mercedes-Benz Center
for this purpose.
Changing the rear bulbs
License plate lamp
The only rear bulbs you can change are the
W 5 W license plate lamp bulbs.
X
Switch off the lights.
X
Lever lamp housing : out of the frame
using a screwdriver.
X
Unscrew the bulb holder from the lamp
housing and pull out the bulb.
X
Insert a new bulb into the bulb holder and
screw the bulb holder into the lamp
housing.
X
Press the lamp housing back into the frame
until it engages.
Windshield wipers
Switching the windshield wipers on/
off
G WARNING
The windshield will not longer be wiped
properly if the wiper blades are worn. This
could prevent you from observing the traffic
conditions, thereby causing an accident.
Replace the wiper blades twice a year, ideally
in spring and fall.
!
Do not operate the windshield wipers
when the windshield is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windshield can
scratch the glass if wiping takes place when
the windshield is dry.
!
If the windshield wipers leave smears on
the windshield after the vehicle has been
washed in an automatic car wash, wax or
other residues may be the reason for this.
Clean the windshield using washer fluid
after washing the vehicle in an automatic
car wash.
Combination switch
1
$ Windshield wiper off
2
Ä Intermittent wipe, low
3
3 Å Intermittent wipe, high
4
4
° Continuous wipe, slow
5
¯ Continuous wipe, fast
B
í Single wipe/ î To wipe the
windshield using washer fluid
X
Switch on the ignition.
X
Turn the combination switch to the
corresponding position.
!
Intermittent wiping with rain sensor: due
to optical influences and the windshield
becoming dirty in dry weather conditions,
the windshield wipers may be activated
inadvertently. This could then damage the
windshield wiper blades or scratch the
windshield.
3 Rain sensor set to low sensitivity.
4 Rain sensor set to high sensitivity.
Windshield wipers
97
Ligh
ts
an
d
wind
sh
ield
wip
er
s
Z