Mercedes-Benz Coupe GT, Руководство оператора

Страница: 246 / 286

X
Switch on the hazard warning lamps
(
Y
page 94).
X
Make sure that the SmartKey is in position
2 in the ignition and that the engine is
running throughout the towing procedure.
X
Move the transmission to N with the E-
SELECT lever. Check the transmission
position in the instrument cluster.
Towing a vehicle with both axles on
the ground
When having your vehicle towed, observe the
important safety notes (
Y
page 242).
X
Switch on the hazard warning lamps
(
Y
page 94).
i
When towing with the hazard warning
lamps switched on, use the combination
switch as usual to signal a change of
direction. In this case, only the turn signals
for the desired direction flash. When the
combination switch is reset, the hazard
warning lamps start flashing again.
X
Insert the SmartKey into the ignition lock
(
Y
page 113).
X
Start the engine and leave the SmartKey in
the ignition.
X
Move the transmission to N with the E-
SELECT lever.
X
Check the transmission position in the
instrument cluster display (
Y
page 119).
X
Leave the engine running during the entire
towing procedure.
Transporting the vehicle
The towing eye can be used to pull the vehicle
onto a trailer or transporter for transporting
purposes.
!
Only lash the vehicle down by the wheels
or wheel rims, not by parts of the vehicle
such as axle or steering components.
Otherwise, the vehicle could be damaged.
X
Start the engine.
X
Make sure that the SmartKey is in position
2 in the ignition and that the engine is
running during the entire loading operation.
X
Move the transmission to N with the E-
SELECT lever. Check the transmission
position in the instrument cluster.
As soon as the vehicle is loaded:
X
Prevent the vehicle from rolling away by
applying the electric parking brake.
X
Shift the transmission to P with the button
in the center console.
X
Turn the SmartKey to position 0 in the
ignition lock and remove the SmartKey
from the ignition lock.
X
Secure the vehicle.
Fuses
Important safety notes
G WARNING
Only use fuses approved by Mercedes-Benz
with the specified amperage for the system in
question and do not attempt to repair or
bridge a blown fuse. Using other than
approved fuses or using repaired or bridged
fuses may cause an overload leading to a fire,
and/or cause damage to electrical
components and/or systems. Have the cause
determined and remedied by an authorized
Mercedes-Benz Center.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or
systems could be damaged.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the
components on the circuit and their functions
stop operating.
Blown fuses must be replaced with fuses of
the same rating, which you can recognize by
the color and value. The fuse ratings are listed
244
Fuses
Breakdo
wn
ass
is
tanc
e