Mercedes-Benz Coupe GT, Руководство оператора

Страница: 169 / 286

Display messages Possible causes/consequences and M M Solutions
X
Make sure that there are no objects on the seat adding to the
weight.
The system may otherwise detect the additional weight and
interpret the seat occupant's weight as greater than it actually
is.
X
Keep the seat unoccupied, close the front-passenger door and
switch on the ignition.
Observe the 45 (
Y
page 42) indicator lamp and the
multifunction display and check the following:
Seat unoccupied and ignition switched on:
R
the 45 indicator lamp must light up and remain lit. If the
indicator lamp is on, OCS (
Y
page 42) has disabled the front-
passenger air bag.
R
the Front Passenger Airbag Enabled See Operator's Front Passenger Airbag Enabled See Operator's
Manual Manual or Front Passenger Airbag Disabled See Front Passenger Airbag Disabled See
Operator's Manual Operator's Manual display messages must not be shown in
the multifunction display. Wait for a period of at least
60 seconds until the necessary system checks have been
completed. This is necessary to make sure that the display
messages do not appear in the multifunction display.
If these conditions are fulfilled, the front-passenger seat can be
occupied again. Whether the 45 indicator lamp remains lit
or goes out depends on how OCS classifies the occupant.
If the conditions are not fulfilled, the system is not operating
correctly.
X
Visit a qualified specialist workshop immediately.
G WARNING
If the 45 indicator lamp remains off even after performing the above corrective steps, do
not have any children twelve years old and under and other small individuals use the front-
passenger seat until the system has been repaired.
Displays and operation
167
On-
boar
d
com
pu
te
ran
d
dis
pla
ys
Z