Mercedes-Benz Comand MY11, Руководство по эксплуатации

Страница: 61 / 194

Option 1: intersection list with character
bar
X
Enter an intersection. Instructions for
entering characters using city input as an
example can be found in the "Entering
characters in navigation mode (entering a
city)" section (
Y
page 30).
:
List entry most closely resembling the
characters entered so far
;
List
=
Character bar
Option 2: intersection list as selection list
X
Select an intersection by turning cVd the
COMAND controller.
X
Irrespective of the option, press W to
confirm your selection.
The address entry menu appears again. The
intersection selected has been entered.
X
Start route calculation (
Y
page 56).
Selecting a destination from the
destination memory (e.g. My address)
Introduction
The destination memory always contains an
entry named "My address". You may wish to
assign your home address to this entry, for
example (
Y
page 57), and select it for route
guidance. This entry is always located at the
top of the list in the destination memory.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Select Destination in the navigation
system menu bar by turning cVd the
COMAND controller and pressing W to
confirm.
X
Select From Memory and press W to
confirm.
You will see the destination memory list
either with the character bar (option 1) or
as a selection list (option 2).
Option 1: destination memory list with
character bar
X
Enter a destination, e.g. "My address".
Instructions for entering characters using
city input as an example can be found in the
"Entering characters in navigation mode
(entering a city)" section (
Y
page 30).
Destination entry
59
Na
vigat
ion
system
Z