Mercedes-Benz Comand MY11 Скачать руководство пользователя

Страница: 146 / 194

Permissible formats

COMAND supports the following formats:

MPEG1 Audio Layer 3 (MP3)

Microsoft Windows Media Audio V2, V7, V8

and V9 (WMA)

Permissible bit and sampling rates

COMAND supports MP3 files of the following

types:

constant and variable bit rates from

32 kbit/s to 320 kbit/s

sampling rates of 8 kHz to 48 kHz

COMAND supports WMA files of the

following types:

fixed bit rates from 5 kbit/s to 384 kbit/s

sampling rates of 8 kHz to 48 kHz

COMAND does not support WMA files of the

following types:

DRM (Digital Rights Management)

encrypted files

Only use tracks with a bit rate of at least

128 kbit/s and a sampling rate of at least

44.1 kHz. Lower rates can cause a

noticeable deterioration in quality. This is

especially the case if you have activated a

surround sound function.

Notes on copyright

MP3 or WMA tracks that you create or play

back are generally subject to copyright

protection in accordance with the applicable

international and national regulations.
In many countries, reproductions, even for

private use, are not permitted without the

prior consent of the copyright holder.
Make sure that you know about the applicable

with these.
If you own these rights yourself, e.g. for your

own compositions and recordings, or if the

these restrictions do not apply.

Notes on CDs/DVDs

Discs with copy protection are not

compatible with the audio CD standard and

therefore may not be able to be played by

COMAND.
Playback problems may occur when playing

copied discs. There is a wide range of data

carriers, disc-writing software and writers

available. This variety means that there is no

guarantee that the system will be able to play

discs that you have copied yourself.
There may be playback problems if you play

CDs that you have copied yourself with a

storage capacity of more than 700 MB. CDs

of this type do not conform to the currently

applicable standards.

On many DVD audio discs, the last track

does not contain any music and COMAND

then switches to the next disc. This is

normal system behavior and does not mean

that there is a malfunction.

Do not affix stickers or labels to the discs.

They could peel off and damage the drive.
The drive is designed to hold discs which

comply with the EN 60908 standard.

Therefore, you can only use discs with a

maximum thickness of 1.3 mm.
If you insert thicker discs, e.g. those that

contain data on both sides (DVD on one

side and audio data on the other), they

cannot be ejected and can damage the

drive.
Do not use discs with a diameter of 8 cm,

even with an adapter. Only use round discs

with a diameter of 12 cm.

COMAND is able to play back audio CDs

in multichannel audio format.

MUSIC REGISTER

General notes

You can store music files in MP3 or WMA

format in the MUSIC REGISTER. The memory

has a capacity of 6 GB.

144

MUSIC REGISTER

Audi

Содержание Comand MY11



































































































































































































Результаты поиска

Содержание Comand MY11

Отзывы:

Похожие инструкции для Comand MY11

Бренды по названию

Популярные бренды

Mercedes-Benz Comand MY11, Руководство по эксплуатации

Результаты поиска

Содержание Comand MY11

Отзывы:

Похожие инструкции для Comand MY11

Бренды по названию

Популярные бренды