Mercedes-Benz Comand MY11, Руководство по эксплуатации

Страница: 54 / 194

Basic settings
Route mode
Setting route type and route options
You can select the following route types:
R
Short Route : COMAND calculates a route
with the shortest possible (minimized)
distance without taking traffic reports into
consideration.
R
Dynamic Route : same route type as Fast
Route . In addition, COMAND takes any
traffic reports received with regard to the
route into account during route guidance.
The navigation system can help you avoid
a traffic jam, for example, by recalculating
the route.
R
Dynamic Route Only After Request :
same route type as Dynamic Route . After
recalculating the route, COMAND asks you
whether you wish to adopt the new route
or whether you would prefer to continue
along the original route.
R
Eco Route : the Eco Route (economic
route) is a variant of the Fast Route route
type. COMAND will attempt to minimize the
journey distance at the expense of a slightly
increased journey time.
R
Fast Route : COMAND calculates a route
with the shortest (minimized) journey time
without taking traffic reports into
consideration.
i
On very long routes, the Eco Route more
or less corresponds to the Fast Route
route type.
Select the route options Avoid Highways ,
Avoid Toll Roads , Avoid Tunnels , Avoid
Ferries and Avoid Auto Trains . You can
select more than one route option.
X
To call up the route mode menu: press
the Ø function button.
X
Select Navi in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Select Mode and press W to confirm.
Route mode menu (start of menu)
:
To select the route type
;
To set route options
Route mode menu (end of menu)
X
Select a route type and press W to confirm.
A filled circle indicates the current setting.
X
Select the route option(s) and press W to
confirm.
The route options are switched on O or off
ª , depending on the previous status.
i
If you change the route type and/or the
route options while route guidance is active
(the route has been calculated), COMAND
will calculate a new route.
If you change the route type and/or the
route options while route guidance is
inactive (no destination has been entered
yet), COMAND uses the new setting for the
next route guidance.
i
The route calculated may, for example,
include ferry connections, even if the
52
Basic settings
Navigat
ion
system