If you come into contact with the tyre sealant,
observe the following:
R
Rinse off the tyre sealant from your skin
immediately with water.
R
If the tyre sealant comes into contact with
your eyes, immediately rinse them thor-
oughly with clean water.
R
If tyre sealant is swallowed, immediately
rinse your mouth out thoroughly and drink
plenty of water. Do not induce vomiting,
and seek medical attention immediately.
R
Immediately change out of clothing which
has come into contact with tyre sealant.
R
If an allergic reaction occurs, seek medical
attention immediately.
!
Do not operate the tyre inflation compres-
sor for longer than ten minutes at a time with-
out a break. It may otherwise overheat.
The tyre inflation compressor can be oper-
ated again once it has cooled down.
Comply with the manufacturer's safety instruc-
tions on the sticker on the tyre inflation com-
pressor.
Using the TIREFIT kit
X
Do not remove any foreign objects which have
penetrated the tyre, e.g. screws or nails.
X
Remove the tyre sealant bottle, the accom-
panying TIREFIT sticker and the tyre inflation
compressor from the stowage space under
the boot floor (
Y
page 336).
X
Affix part
:
of the TIREFIT sticker to the
instrument cluster within the driver's field of
vision.
X
Affix part
;
of the TIREFIT sticker near the
valve on the wheel with the defective tyre.
X
Remove filler hose
B
and connector
=
from
the bottom section of tyre inflation compres-
sor housing
;
.
X
Slide the yellow filler hose connector into the
mounting on yellow cap
A
of tyre sealant
bottle
:
until the connector engages.
X
With the sealing rings in front, slide yellow cap
A
of tyre sealant bottle
:
into the holder of
tyre inflation compressor
;
. The cap must
engage in both hooks.
X
Remove the cap from valve
C
on the faulty
tyre.
X
Screw filler hose
D
onto valve
C
.
X
Insert connector
=
into a socket in your vehi-
cle.
Cigarette lighter socket: (
Y
page 316)
12 V socket: (
Y
page 316)
Flat tyre
339
Breakdow
na
ssistance
Z
