
Vehicles with KEYLESS-GO or KEYLESS-GO
start function: if the key is in the immediate
vicinity to the vehicle, the convenience closing
function is available.
When you lock the vehicle, you can simultane-
ously:
R
close the side windows
R
close the sliding sunroof or the panorama
sliding sunroof
On vehicles with a panorama sliding sunroof,
you can then close the roller sunblinds.
Notes on the automatic reversing feature for:
R
the side windows (
Y
page 93)
R
the sliding sunroof or the panorama sliding
sunroof (
Y
page 97)
Using the key
X
Press and hold the
&
button until the side
windows and the sliding sunroof or the pano-
rama sliding sunroof are fully closed.
X
Make sure that all the side windows and the
sliding sunroof or panorama sliding sunroof
are closed.
X
Vehicles with panorama sliding sunroof:
press and hold the
&
button once more
until the roller sunblinds of the panorama slid-
ing sunroof close.
X
To interrupt convenience closing: release
the
&
button.
Using KEYLESS-GO
The driver's door and the door at which the han-
dle is used must both be closed. The key must be
outside the vehicle. The gap between the key
and the corresponding door handle should not
be greater than 1 m.
X
Touch recessed sensor surface
:
on the
door handle until the side windows and the
sliding sunroof or the panorama sliding sun-
roof are fully closed.
Make sure you only touch recessed sensor
surface
:
.
X
Make sure that all the side windows and the
sliding sunroof or panorama sliding sunroof
are closed.
X
Vehicles with panorama sliding sunroof:
touch recessed sensor surface
:
on the door
handle again until the roller sunblinds of the
panorama sliding sunroof close.
X
To interrupt convenience closing: release
recessed sensor surface
:
on the door han-
dle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
X
Close all doors.
X
Turn the key to position 1 or 2 in the ignition
lock.
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (
Y
page 94).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch on
the door control panel until the side window is
completely closed (
Y
page 94).
X
Hold the switch for an additional second.
X
If the corresponding side window remains
closed after the button has been released, the
side window has been reset correctly. If this is
not the case, repeat the steps above again.
Side windows
95
Ope
ni
ng
and
cl
os
in
g
Z