Mercedes-Benz Atego, Руководство пользователя, Страница: 97 / 131

Engine
Description and roadside assistance
95
Guidelines for Breakdown Services (Subject to technical modifications)
i
Starting and stopping the engine with the cab tilted
왘
Turn vehicle key in steering lock to drive position.
왘
Tilt cab forwards (see page 91).
Vehicles with two pushbuttons on the engine
The pushbuttons are on the left-hand side of the engine.
Starting the engine
왘
Hold down the start pushbutton
2
until the en-
gine starts.
If a gear is engaged, the start pushbutton is
inoperative.
Starting the engine and increasing the engine rpm
왘
Press and hold down start pushbutton
2
.
The engine starts and the rpm increase after about 3 seconds.
왘
Hold down the start pushbutton
2
until the desired engine speed is reached.
When the start pushbutton
2
is released, the engine continues to run at the set speed.
Switching off the engine
왘
With the engine running, press the start pushbutton
2
or the stop pushbutton
1
.
The engine dies.
Cranking the engine without starting
왘
Hold down the start pushbutton
2
and the stop pushbutton
1
at the same time.
The engine turns over without starting.
Risk of injury
G
When the cab is tilted and the engine is running, make sure that you do not touch hot or moving engine parts
(e.g. exhaust manifold, poly-V belt, fan). You may be injured.
If working on public roads, pay attention to the traffic situation and secure the area around the vehicle
accordingly.
1
Stop pushbutton on engine
2
Start pushbutton on engine
i
The engine speed can be increased up to the maximum governed rpm.