Mercedes-Benz Atego, Руководство пользователя, Страница: 34 / 131

32
Description and roadside assistance
Guidelines for Breakdown Services (Subject to technical modifications)
i
Instrument panel
¥ ¥.
Risk of accident
G
The reservoir pressure in the
ancillary consumer circuit has
dropped below 5.5 bar.
Gears can no longer be shifted
correctly.
왘
Stop the vehicle as soon as possible
taking into account the traffic situa-
tion.
왘
Apply parking brake.
왘
Run the engine until the display mes-
sage disappears and a sufficient res-
ervoir pressure is obtained.
왘
If the fault occurs frequently, check
the compressed air system for leaks.
Have the compressed air system
repaired at a qualified workshop.
·
100 °C
·.
Coolant
temperature
high 100 °C
(example)
A coolant temperature of about
100°C has been reached while
driving.
왘
Demand less power from the engine.
왘
Make sure that the air supply to the
radiator is not obstructed.
Ç Ç.
Engine
protection:
Power reduced
The coolant temperature is too
high. The engine output is
automatically reduced.
왘
Reduce speed and shift to a lower
gear if necessary.
왘
Make sure that the air supply to the
radiator is not obstructed.
© ©.
5.0 l
Top up engine
oil
(example)
The engine oil level is too low.
왘
Vehicles with Plus onboard comput-
er: Add the oil quantity shown in the
display.
왘
If it is not possible to top up the dis-
played oil quantity, the vehicle can
be driven approximately another
2000 to 6000 km, depending on op-
erating conditions, until the status
indicator lights up red.
< <.
Clutch:
Overload
Leave clutch
to cool
The permissible operating
temperature of the clutch has
been exceeded. There is a risk
of clutch damage.
i
The display message
consists of 2 parts. Press button
„
to see the 2nd part.
왘
Shift to a lower gear to maneuver the
vehicle or to move off.
왘
Finish the moving-off or maneuver-
ing process as quickly as possible.
Display message with yellow status indicator
Standard
onboard
computer: Plus onboard
computer: Possible cause/consequence Possible remedy