Mercedes-Benz Atego, Руководство пользователя, Страница: 78 / 131

76
Description and roadside assistance
Guidelines for Breakdown Services (Subject to technical modifications)
i
Transmission
Major teach-in process
The major teach-in process is necessary when
• The GS control unit has been replaced
• The engine has been replaced
• Fault code
a 2 1011 is displayed
• Fault code a 2 8093 is displayed
왘
Press and hold down neutral button and function button.
왘
Turn vehicle key in steering lock to drive position.
왘
Start the engine within 10 seconds when the transmission neutral position N flashes in the display.
왘
Release neutral button and function button.
The teach-in process is complete.
i
If fault code a 2 1011 was displayed, turn the vehicle key in the steering lock all the way back, wait about 5
seconds and then turn it back to the drive position.
!
If the fault displays do not disappear after the teach-in process, have the fault rectified at a qualified
specialist workshop possessing the required expertise and tools in order to perform the necessary work.
Mercedes-Benz recommends a Mercedes-Benz service center for this work.