Mercedes-Benz 2008 R 320 CDI 4MATIC, Руководство оператора

Страница: 138 / 569

137
Controls in detail
Seats
Removing head restraints
Seat position for removal of head restraints
from outboard second-row seats
1
Head restraint
2
Release button
왘
To remove head restraint
1
, pull head
restraint
1
to its uppermost position.
왘
Press release button
2
and pull out
head restraint
1
.
Installing head restraints
왘
Insert head restraint
1
into openings
on the seat backrest.
왘
Push head restraint
1
down until it
audibly engages.
왘
Push release button
2
and adjust
head restraint
1
to the desired
position (
컄
page 135).
Armrests
6-seat vehicles
The second-row seat armrests can be
folded up, when loading for example, and
adjusted.
Folding up:
왘
Move the armrest into a vertical
position until it engages.
Adjusting:
왘
With the armrest folded up, disengage
the armrest by pushing it towards the
rear slightly.
왘
Fold the armrest down to the lowest
and then to the desired position until it
engages.
왘
To readjust the armrest to a higher
position, move armrest up to the
desired position until it engages.
i
The head restraint of the second-row middle
seat* and the third-row seat head restraints are
removed in the same manner.
i
On the outboard second-row seats, the
guide bar with the detent must be on the left.
i
The head restraint of the second-row middle
seat* and the third-row seat head restraints are
installed in the same manner.
i
To readjust the armrest to a lower position,
you must first fold up the armrest again and re-
peat the steps above.