Mercedes-Benz 2008 R 320 CDI 4MATIC, Руководство оператора

Страница: 502 / 569

501
Practical hints
Flat tire
Lowering the vehicle
왘
Vehicles with scissors-type jack:
Attach ratchet to vehicle jack in such a
way that the word
DOWN can be seen.
왘
Lower the vehicle until it is resting fully
on its own weight:
왘
Vehicles with screw-type jack:
Turn crank counterclockwise.
왘
Vehicles with scissors-type jack:
Turn ratchet in direction DOWN .
왘
Remove the jack.
1
-
5
Wheel bolts
6
Wheel wrench
왘
Tighten the five wheel bolts evenly,
following the diagonal sequence
illustrated (
1
to
5
), until all bolts
are tight. Observe a tightening torque
of 110 lb-ft (150 Nm).
왘
Store jack and all other vehicle tool kit
items back into the storage well.
Warning!
G
Inflate collapsible tire only after the wheel is
properly mounted.
Inflate the collapsible tire using the electric
air pump (
컄
page 499) before lowering the
vehicle.
Warning!
G
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
110 lb-ft (150 Nm).
i
The removed road wheel cannot be stored in
the spare wheel well under the cargo compart-
ment floor, but should be transported in the
cargo compartment wrapped in a protective
wrap.
Vehicles with TPMS or Advanced TPMS*:
Do not activate the tire inflation pressure moni-
tor until a full size wheel/tire with functioning
sensor has been placed back into service on the
vehicle.