Mercedes-Benz 2008 R 320 CDI 4MATIC, Руководство оператора

Страница: 147 / 569

146
Controls in detail
Lighting
USA only
When the engine is running, and you turn
the exterior lamp switch to position
C
or
B
, the manual headlamp mode has
priority over the daytime running lamp
mode.
The corresponding exterior lamps switch
on (
컄
page 143).
Locator lighting and night security
illumination
The locator lighting and the night security
illumination are described in the “Control
system” section, see “Setting locator light-
ing” (
컄
page 178) and “Setting night secu-
rity illumination” (
컄
page 179).
Fog lamps
i
With the daytime running lamp mode
activated and the exterior lamp switch in
position
M
, you cannot switch on the high
beam headlamps.
The high beam flasher is available at all times.
For nighttime driving, turn the exterior lamp
switch in position
B
or
U
to permit
activation of the high beam headlamps.
Warning!
G
In low ambient lighting or foggy conditions,
only switch from position
U
to
B
with
the vehicle at a standstill in a safe location.
Switching from
U
to
B
will briefly
switch off the headlamps. Doing so while
driving in low ambient lighting conditions
may result in an accident.
i
Fog lamps will operate with the parking
lamps and/or the low beam headlamps on. Fog
lamps should only be used in conjunction with
low beam headlamps. Consult your State or
Province Motor Vehicle Regulations regarding
permissible lamp operation.
i
Fog lamps cannot be switched on with the
exterior lamp switch in position
U
. To switch
on the fog lamps, turn the exterior lamp switch to
position
B
first.