Mercedes-Benz 2008 R 320 CDI 4MATIC, Руководство оператора

Страница: 144 / 569

143
Controls in detail
Lighting
왔
Lighting
For information on how to switch on the
headlamps and use the turn signals, see
“Switching on headlamps” (
컄
page 58)
and “Turn signals” (
컄
page 59).
Exterior lamp switch
i
If you drive in countries where vehicles drive
on the other side of the road than the country in
which the vehicle is registered, you must have
the headlamps modified for symmetrical low
beams. Relevant information can be obtained at
any authorized Mercedes-Benz Light Truck
Center.
i
Vehicles with active Bi-Xenon* headlamps:
The active Bi-Xenon* headlamps monitor the
vehicle’s steering angle and speed, then auto-
matically shift their beams to either side to
better follow the curvature of the road ahead, in-
creasing usable illumination over conventional
headlamps.
1
‚
Standing lamps, left
(turn left two stops)
2
ˆ
Standing lamps, right
(turn left one stop)
3
M
Off
Daytime running lamp mode
(
컄
page 145)
4
U
Automatic headlamp mode
Daytime running lamp mode
(
컄
page 145)
5
C
Parking lamps (also side marker
lamps, tail lamps, license plate
lamps, instrument panel lamps)
6
B
Low beam headlamps or high
beam headlamps
7
‡
Front fog lamps
8
†
Rear fog lamp
i
The exterior lamps switch off automatically
when you remove the SmartKey from the starter
switch or open the driver’s door with the ignition
switched off.
When the parking lamps or the rear fog lamp are
switched on and you remove the SmartKey from
the starter switch or open the driver’s door, an
acoustic signal sounds.
In addition the message
Switch Off Lights
appears in the multifunction display.
Switch off the parking lamps or the rear fog lamp
manually.
!
Failure to switch off the parking lamps when
leaving the vehicle may result in a discharged
battery.