Merak MEP2L, Руководство пользователя

Страница: 68 / 73

Configuration
COMMAND LIST
OTHER
COMMANDS
PROG CONS COMMENTS
Type of
connected
buttons
*12#n *12*
Set whether car alarm
button and maintenance
alarm/end of alarm button
are NO or NC type:
n=0 (NO);
n=1 (NC)
Default value = 00
See example E
Auxiliary output
function
*28#n *28*
Behavior of the auxiliary
output J3 (4 and 5): n=0-5
0 = off.
1 = activated if no power
supply at J1
2 = emits 1 second pulse
3 = fault monitoring mode
(usually on, but off if no
battery or phone line)
4 = activated by pressing
the alarm button
5 = activated from the
moment the alarm button
is pressed until the end of
the alarm call
Default value = 0
Car number *29#n *29*
Assign a number to the lift
car: n=1-4 in case up to 4
phones shares the line
Default value = 1
Version *88* Consult HW and FW version
Serial number *89*
Consult equipment serial
number
Line status *94#
Checking the status of the
phone line
Reestablish *852#
Reset the MEP2L to factory
settings, password needed
30 MEP2L M3.0-S1.4 EN
2020 Merak Telsis SL. All rights reserved