Merak MEP2L, Руководство пользователя

Страница: 59 / 73

Configuration
CONFIGURATION EXAMPLES: TEST CALL
Always end up with
1. Enter programming mode
"Enter the new phone"
•
Exit programming mode
" Enter command "
2. Key in command:
3. Type in the password:
4. Enter test phone number:
5. Enter equipment ID number required by P100,
maximum 8 digits
Press button 3 seconds
B) Program 1
st
test call phone: default test
protocol is P100
See example A
See example A
6. Establish period between test calls:
7. Set number of test attempts:
8. Force a test call (optional):
The final 4 digits represent the time in minutes.
Default: 4320 minutes (every 72 hours), according to Standard.
The final digit represents the number of test call attempts.
Default 1 (1 attempt); maximum 3 attempts.
21 MEP2L M3.0-S1.4 EN
2020 Merak Telsis SL. All rights reserved