Merak MEP2L, Руководство пользователя

Страница: 60 / 73

Configuration
CONFIGURATION EXAMPLES
After hearing two tones, turn the phone to record in
front of the built-in microphone, wait GREEN led is
turned ON, talk slowly and clearly, finish pressing #
1. Enter programming mode:
[two-tone sound]
7. Exit programming mode
" Enter command "
2. Key in command:
3. Type in the password:
4. Record location message:
5. Listen to the location message:
Press button 3 seconds
C) Voice locution message
See example A
See example A
6. Delete the location message:
The MEP2L allows you to record a voice message with the
location of the lift to facilitate the work of the rescue
service
Press the pad key to finish
"Correct command"
NOTE : The recorded location message can be heard
remotely at any time by pressing *51* while the call is
set. If parameter 22 has been set to 1 or 2, the rescue
service, when it receives an alarm call, can listen to the
recorded voice over by pressing the 5 key of its own
terminal (while the 3 key it speaks directly to the cabin),
22 MEP2L M3.0-S1.4 EN
2020 Merak Telsis SL. All rights reserved