MEP SHARK 282 Скачать руководство пользователя страница 38

Страница: 38 / 152

MEP S.p.A.

5--2

Use and maintenance manual

SHARK 282

1 -- LED STAND BY

This either confirms machine start up or indicates an emergency state to the

operator.

2 -- PREDISPOSITION FOR INVERTER (OPTIONAL)

Selects the blade cutting speed range: from 20 to 45 mt/min. for the 1st speed and

from 35 to 90 mt/min. for the second speed. This model has been designed for the

installation of a frequency converter (inverter) and is set up for both the electrical

wiring and converter control potentiometer, which must be housed in the machine

control panel.

3 -- AUTOMATIC THERMAL--MAGNET CUTOUT WITH MINIMUM VOLTAGE
RELAY AND HATCH LOCKING DEVICE

The machine is provided on the right of the control panel with a main switch with

a locking device which, when set in the ON position (1), powers up the machine

by resetting the minimum---voltage relay and the blade motor thermal magnet

cutout. This device has three protection systems against power failure. When

there is a power failure the electrical devices are all shut down, instantly shutting

down the machine and preventing automatic restoring of power on power return.

A further function is to reset the thermal relay, which protects against

overcurrents.

4 -- PREDISPOSITION FOR CUT CONTROL SYSTEM (OPTIONAL)

This model is set up for CCS (Cut Control System) installation --- an accessory

which enables a semiautomatic/dynamic work cycle to be carried out.

5 -- POLARITY CHANGE SWITCH

This selects the blade cutting speed, 36/72 mt/min. on the standard 2---speed

machine.

6 -- EMERGENCY STOP MUSHROOM BUTTON

Pressing this button immediately stops machine operation. The emergency

button, designed to conform to all safety standards, is positioned so that it is

easily accessible at any time and is clearly visible --- being a red button on a yellow

background. To reset the emergency button, rotate actuator by 45° .

OPTIONAL PEDAL FOR VERSION WITH AUTOMATIC VICE (MA)

The foot pedal opens and closes the vice during normal machine operation.

Содержание SHARK 282

























































































































































Результаты поиска

Содержание SHARK 282

Отзывы:

Бренды по названию

Популярные бренды

MEP SHARK 282, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание SHARK 282

Отзывы:

Бренды по названию

Популярные бренды