MEP SHARK 282, Руководство по эксплуатации и обслуживанию

Страница: 118 / 152

MEP S.p.A.
8--2 108
Use and maintenance manual SHARK 282
Maintenance requirements
H
All ordinary and extraordinary maintenance must be carried out with the power
switched off and the machine in emergency condition.
H
To guarantee perfect operation, all spare parts must be MEP S.p.A originals.
H
On completion of maintenance works, ensure that the replaced parts or any tools
used have been removed from the machine before starting it up.
H
Any behaviour not in accordance with the instructions for using the machine may
create risks for the operator.
H
Therefore, read and follow all the instructions for use and maintenance of the
machine and those on the product itself.
General maintenance
Daily
The daily maintenance operations to carry out on the machine are as follows:
"
remove all swarf from the machine (preferably with a non---fibrous cloth);
"
empty the swarf drawer (this is located on the right side of the base);
"
top up the lubricant/coolant level;
"
check state of blade wear and replace if necessary;
"
check the blade cleaning brush, clean and relocate; if worn, replace;
"
at the end of the working day, slacken the blade to 5 Bar (70 Kg) tension to
prevent unnecessary and damaging stress on the machine.
Weekly
The weekly maintenance operations are as follows:
"
remove all swarf;
"
clean the vice and lubricate all joints and sliding surfaces with a good quality
oil;
"
check the position of the blade---tensioning rod, which should project by 44
mm. from the blade tensioning cylinder; if this is not so, proceed to top up the
cylinder as described in Chapter 7;
"
check vice sliding; if it is not precise and has transversal play, adjust as
instructed in Chapter 7.