MEP SHARK 282, Руководство по эксплуатации и обслуживанию

Страница: 115 / 152

7--19 105 Adjustments
Front flywheel
The front flywheel must be adjusted so that it is aligned with the rear wheel. The
purpose of this adjustment is to make sure the back of the blade remains about 1
mm from the edge of the flywheel during rotation. This prevents premature wear
to the blade which, due to excessive friction with the edge, may crack.
"
Slacken the blade tension and open the cutting head cover;
"
slacken the grub screw and, using a mallet, tap the shaft in or out;
"
finally, close the cover and set the blade in motion;
"
check the distance between the blade and edge of the wheels;
"
if necessary, repeat the above operation until a gap of 1 mm is obtained
between the back of the blade and edge of the wheels.