MEP SHARK 282, Руководство по эксплуатации и обслуживанию

Страница: 119 / 152

8--3 109 Maintenance and choice of consumables
Monthly
This section lists the operations to be carried out for the monthly maintenance of
the machine:
"
check the perpendicularity of the blade to the work surface; if it is necessary
to adjust the blade setting, follow the instructions set out in Chapter 7;
"
check on blade orthogonality with respect to the workpiece rest shoulder; if
adjustment is necessary, proceed as instructed in Chapter 7;
"
check that the 0° notch on the work table is in line with the graduation on the
turntable; if not, readjust by regulating the 0° stop; then re---check that the
blade is perpendicular and orthogonal;
"
check the precision of the 45° and 60° left stops and the 45° right stop; if
out---of---set, adjust following the steps indicated in Chapter 7;
"
check the state of the widia inserts and the blade steady button; replace if
worn or chipped; check their positions and adjust if necessary (see Chapter
7);
"
thoroughly clean the bottom of the water tank and the electropump filter;
"
check oil level in the CCS optional hydraulic cylinder (Chapter 7).
Maintenance of working parts
In maintenance work on the SHARK 282 , special attention should be paid to
operating units such as the blade tensioning cylinder, already dealt with in
Chapter 7, topping up levels, the air treatment unit, the pneumatic vice on the
MA version, and the optional CUT CONTROL SYSTEM. The transmission box
equipping the machine needs no maintenance.
Consumable materials
Only specified oils must be used for the hydraulic and pneumatic and for
lubricant/coolant devices. Below is a list of compatible oils for each of these
circuits.
Oil for blade tensioner cylinder
The type of oil supplied with the machine is AGIP OSO 15, class F, ISO and UNI
FD 22; The following are compatible or equivalent oils:
API Cis 22 --- ARAL Dural SR 22 --- CASTROL Hyspin AWS 22 --- ESSO
Spinesso 22 --- IP Hydrus oil 22 --- TOTAL Azolla ZS 22 --- VALVOLINE ETC 22
--- MOBIL Velocite oil D --- Mobil DTE 22 --- MOBIL ATF 220 --- OLIO FIAT
HTF 22 --- Q8 Haydn 22 --- SHELL Tellus oil 22 BP AUTRAN GM---MP;
Blade tensioner unit:
--- tank capacity Lt. 0.6
--- oil volume Lt. 0.5