MEP SHARK 282, Руководство по эксплуатации и обслуживанию

Страница: 34 / 152

MEP S.p.A.
4--6 26
Use and maintenance manual SHARK 282
H
arm with roller on which the bars to be cut rest and for fitting the feed side roller
tables;
H
manual pump for topping up the oil in the pneumatic cylinder;
H
Use and Maintenance manual, including order form for parts in relevant user
language.
Balancing the cutting head
Before making the electrical and pneumatic connections (MA version), the head
return springs must be tensioned to balance the cutting head weight. Using a 10
mm. wrench, tighten the screws until the distance between the first coil of the
spring and the bracket is 8 mm.
Connection to the compressed--air supply (MA version)
The MA version (automatic vice) is supplied with an air treatment unit for the
vice closing system, controlled by a pneumatic cylinder. To ensure perfect
performance and long service life we advise that the machine be connected to a
compressed air system having the characteristics illustrated in the following
diagram.
KEY
1 - DOWN PIPE
2 - CONDENSATE COLLECTOR
3 - DRAIN COCK
4 - AIR FILTER
5 - DRAIN COCK
6 - CONNECTING HOSE
1
2
3
4
5
6