Mendota MEDALLION, Инструкция по установке и эксплуатации, Страница: 3 / 36

You are the owner of a world class heat producing gas direct vent sealed combustion stove.
This elegant, highly efficient Stove will be a constant source of comfort and fascination. It will be the focal point of
beauty and interest in your home.
The Mendota Gas Stove is a true heating appliance incorporating the traditional aesthetics of stove fire viewing with
the controllability and fuel efficiency of a home gas furnace. Of particular interest is the low fuel consumption and
brilliant fire viewing afforded by the patented realistic HearthGlo wood fire-like combustion system.
Carefully read the following instructions prior to actual installation. Proper Mendota Gas Stove installation and
operation will give you years of safe trouble free comfort and enjoyment.
If you have any questions regarding installation or operation of your Mendota Stove please contact your local dealer.
......CAUTION.....
FOR YOUR SAFETY do not install or operate your Mendota Gas Freestanding Stove without first reading and
understanding this manual. Any installation or operational deviation from this manual voids the Mendota Gas Stove
Warranty and may prove hazardous!
Due to high temperatures, the Stove should be located out of traffic and away from furniture and draperies. Children
and adults should be alerted to the hazards of high surface temperature and should stay away to avoid burns or
clothing ignition. Young children should be carefully supervised when they are in the same room as the Mendota Gas
Stove.
Clothing or other flammable material should not be placed on or near the Stove.
The Mendota Gas Stove is a powerful, efficient heating unit. It has been designed as a major source of supplemental
heat. As with any mechanical appliance there can be component shut downs. It is advisable to have an alternate
(back-up) heat supply.
Installation, repair and any adjustments to logs or burner must be done by a qualified service person. The Stove
should be inspected before use and at least annually by a professional service person. More frequent cleaning may
be required due to excessive lint from carpeting, bedding material, carbon build-up, etc. It is imperative that control
compartments, burners and circulating air passageways of the appliance be kept clean. The burner and pilot flames
and logs should be visually checked periodically.
DO NOT use this Stove if any part has been under water or exposed to moisture corrosion. Immediately call a
qualified service technician to inspect the Stove and replace any part of the control system and any gas control which
has been under water. DO NOT use this Stove if the burner does not light immediately. Turn unit off and call
Mendota approved service person if there is any delay in burner light-off.
It is Johnson Gas Appliance Company's policy that no responsibility is assumed by the Company or by any of its
employees or representatives for any damages caused by an inoperable, inadequate, or unsafe condition which is the
result, either directly or indirectly, of any improper operation, installation or servicing procedures.
Building Permit and Installation Inspection Approval Requirements
All installations of Mendota Fireplace and Inserts must comply with all the
requirements stated in this Installation and Operating Instructions Manual.
The Dealer and/or installer must also obtain all required Building Permits
and Inspection Approval from the local building inspection department or the
local body having jurisdiction.
In order to validate warranty coverage, Mendota may require facsimile
copies of the Building Permit and Inspection Approval forms. Failure to
provide adequate proof that the installation conforms to all local requirements and the requirements stated in the
Installation and Operating Instructions Manual will void all applicable warranty.
INSTALLER: THESE INSTRUCTIONS ARE TO REMAIN WITH HOMEOWNER.
2