Mendota FV44i, Инструкция по установке и эксплуатации

Страница: 10 / 42

9
18. You are now ready to hook up the Insert to gas supply. Be sure gas plumbing instructions and all
state and local codes have been carefully followed. Be sure all items on Installation Check-Off
List have been completed.
NOTE: AGA APPROVED FLEX LINES ARE APPROVED FOR USE WITH MENDOTA INSERTS.
19. Carefully slide the Insert into place in the fireplace opening. At this time, check that Insert is lev-
el and plumb with the fireplace opening and positioned in the middle of the opening. If Insert is
unsteady or needs leveling, the unit may need to be “shimmed with washers under the bottom
corners of insert.
22. The proper Insert Faceplate can now be placed in position. Assemble surround by follow-
ing instructions supplied with faceplate kit. Select the appropriate size of faceplate to cover
the area between the Insert and existing fireplace opening.
...IMPORTANT...
NOTE: INSTALLATION, SERVICING AND REPAIR MUST BE DONE BY A QUALIFIED SERVICE PERSON. THE
INSERT SHOULD BE INSPECTED AT LEAST ANNUALLY BY A PROFESSIONAL SERVICE PERSON. MORE
FREQUENT CLEANING MAY BE REQUIRED DUE TO EXCESSIVE LINT FROM CARPETING, BEDDING
MATERIAL, ETC. IT IS IMPERATIVE THAT THE CONTROL COMPARTMENT BURNERS AND CIRCULATING
AIR PASSAGEWAYS OF THE INSERT BE KEPT CLEAN.