16
MENDOTA DESIGNER FRONTS INSTALLATION INFORMATION
The following Designer Fronts are available for the DXV-45 Fireplace:
1.
Andover Arched Door Kit with Firescreen with optional Overlays as listed below:
a.
Black Andover Overlay
b.
Pewter Andover Overlay
c.
Antique Copper Andover Overlay
d.
Gold Andover Overlay
2.
Prairie Rectangular Door Kit with Firescreen with optional Overlays as listed below:
a.
Black Prairie Overlay
b.
Pewter Prairie Overlay
c.
Antique Copper Prairie Overlay
d.
Gold Prairie Overlay
3.
Black or Gold Victoria Filigree
4.
Black or Gold Tuscany Filigree
5.
Millenia Flat Grills in four optional color schemes as listed below:
a.
Black Millenia Flat Grills
b.
Full Brass Millenia Flat Grills
c.
Classic Black and Brass Millenia Flat Grills
d.
Classic Black and Bright Silver Millenia Flat Grills
Information specific to the installation of the Andover and Prairie Fronts
The Andover Door and Prairie Door Fronts are designed to be “Full-Face” trim kits. These two Fronts cover an area equivalent to
that shown in the diagram below. Any material that protrudes into this area on the sides, top or bottom edges can only be flush with
the front surface of the fireplace faceplate.
If planning to install either the Andover
Door or the Prairie Door Front,
DO NOT
COVER THE FACEPLATE OF THE
FIREPLACE WITH ANY MATERIALS
.
Furthermore, any drywall or wall covering
material that is adjacent to the sides, top or
bottom of the Fireplace’s faceplate may not
protrude out past the front surface of the
Fireplace Faceplate’s front surface.
The Andover and Prairie Doors
Mounting Faceplate (required for in-
stallation of the Andover and prairie
Doors) may be covered over with non-
combustible facing materials.
To install Tile, Marble, Slate, Stone, Rocks
or other noncombustible to enhance the arch
shape of the Andover Doors or the Rectan-
gular shape of the Prairie Doors, do so only
after the Andover or Prairie Door Kits have
been installed on the DXV-45 Fireplace.
