17
HEARTH PAD SURFACE MUST BE
FLUSH WITH FIREPLACE BOTTOM
HEARTH PAD
SURFACE
Hearth Protection Pad Installation Information when plan-
ning to Install the Andover or Prairie Fronts
Any hearth protection pad installed in front of the DXV-45 Fireplace
must be designed, built and installed so that the hearth protection pad’s
top surface is flush with the bottom-most surface of the DXV45 Fire-
place. See the diagram to the right.
Information specific to the installation of Millenia Flat Grills, Victoria Filigrees and Tuscany Filigrees
The Millenia Flat Grills, Victoria Filigree and Tuscany Filigree
are designed to be “inside-fit” trim kits. All of these trim kits fit
within the inner perimeter of the Fireplace’s Faceplate and re-
main flush within the Faceplate’s front surface, see Figure be-
low. This fitting method allows flexibility in covering the black
visible surface of the Faceplate with non-combustible materials
such as Tile, Marble, Slate, Stone and Brick; as long as enough
room is allowed for the removal of these Mendota Designer
Fronts and the glass door for servicing,
WARNING: COMBUSTIBLE MATERIALS MUST
NOT COVER THE FRONT SURFACE OF THE
FIREPLACE’S FACEPLATE.
