Memmert HCP 108, Руководство по эксплуатации

Страница: 17 / 48

HCP page 17
Programming example Weekly programmer Programming example Weekly programmer
The unit has to switch on at 9.30 hrs from Mo to Fr (workday group) and switch off at 19.00 hrs. In
addition it has to operate on Saturday from 10.00 to 14.00 hrs.
1. Select operating mode “Weekly programmer“ 1. Select operating mode “Weekly programmer“
After holding down the SET key (approx. 3 sec) the current operating
mode is flashing. Select operating mode “Weekly programmer“ with the
push/turn control while holding down the SET key. After the SET key has
been released the controller is in operating mode “Weekly programmer“.
PRINT SETUP
2. Switch on at 9.30 hrs Mo-Fr
Turn the push/turn control anticlockwise to select
Mo-Fr on
(workday
group).
Hold down the SET key and use the push/turn control to set the switch on
time to
9.30
.
on
off
Mo Tu We Th Fr Sa Su
3. Switch off at 19.00 hrs Mo-Fr
Using the push/turn control to select
Mo-Fr off
(workday group).
Hold down the SET key and use the push/turn control to set the switch off
time to
19.00
.
on
off
Mo Tu We Th Fr Sa Su
4. Switch on at 10.00 hrs Sa
Using the push/turn control to select
Sat on
.
Hold down the SET key and use the push/turn control to set the switch on
time to
10.00
.
on
off
Mo Tu
We
Th Fr Sa Su
5. Switch off at 14.00 hrs Sa
Using the push/turn control to select
Sat off
.
Hold down the SET key and use the push/turn control to set the switch off
time to
14.00
.
on
off
Mo
Tu
We Th Fr
Sa Su
Mo
Sa
Fr
Th We
Tu
Su