Memmert HCP 108, Руководство по эксплуатации

Страница: 18 / 48

HCP page 18
9 Programme operation 9 Programme operation
PRINT SETUP
In this operating mode it is possible to set up to 40 freely programmable ramps for temperature and
humidity. Rotating the press/turn control while holding down the SET key selects the following parameters
in sequence after released the SET key:
- a new programme can be programmed or
an existing programme can be edited
EDIT
- stops the programme STOP
- starts the programme START
After EDIT has been activated, the following parameters can be selected and can be altered as described
in the Section 6.
loop
t3
t4 t2
t1
on
off
Mo Tu We Th Fr Sa Su
3
4
2
1
STERI
DEFRO
mb
IN 1 IN 2 OUT
MIN
AUTO
MAX
°C °C
%
rh
h
PRINT SETUP
Delayed programme start: switch-on day Delayed programme start: switch-on day
Range: Monday to Sunday, workdays Mo-Fr, weekend Sa-Sun, all days Mo-Su or no day. If no day of the
week is selected, the oven starts up immediately after the programme is started. (
instant start
)
loop
t3
t4 t2
t1
on
off
Mo Tu
We
Th Fr Sa Su
3
4
2
1
STERI DEFRO
mb
IN 1
IN 2 OUT
MIN
AUTO
MAX
°C °C
%
rh
h
PRINT SETUP
Delayed programme start: switch-on time Delayed programme start: switch-on time
Range:
00.00
to
23.59
If no switch-on day has been selected it is not possible to select a switch-on time, and the programme
starts immediately. (
instant start
)