Memmert HCP 108, Руководство по эксплуатации

Страница: 6 / 48

HCP page 6
min. 15
cm
min. 8
cm
min. 8
cm
min.
20
cm
2 Installation
The oven can be placed on the floor or on a bench
(working surface).
It is important that the oven is set up accurately
horizontally; the door may have to be adjusted
(see section 21)
The spacing from the back of the oven to the
wall should be at least 15 cm. The spacing to the
ceiling must not be less than 20 cm and that at
the side to the wall not less than 8 cm. Generally
it is essential to have adequate air ventilation
around the oven.
2.1 Subframe (accessory)
2.1 Subframe (accessory)
Models 108, 153 and 246 can be placed on a subframe.
2.2 Stackable version (accessory)
2.2 Stackable version (accessory)
Two ovens of the same model size can be stacked on each other.
Foot locators have to be fitted on the bottom oven.
Mounting:
•
Take off cover of bottom oven
• Place drill jig (supplied with foot locators) into the inverted cover
at the back
• Mark holes and drill 4.2 mm dia
• Screw the foot locators to the top of the cover using the screws
and nuts supplied
• Re-fit the cover
WARNING! Always pull out the supply plug before WARNING! Always pull out the supply plug before
opening the oven cover! opening the oven cover!