Memjet AS-1180C, Руководство по обслуживанию

Страница: 26 / 181

SECTION 2
TROUBLESHOOTING
24
Toolbox System Status Messages (continued)
Displayed, in red , in the M Series Toolbox utility.
X_INK_LOW
Example: CYAN_ INK_LOW
X = Color.
One or more Ink Tanks
are low on ink. Ink Tank replacement will be necessary
soon. Reorder Ink
INK_OUT_X
Example: INK_OUT_YELLOW
X = Color or MULTI
One or more Ink Tanks
are out of ink
Replace empty Ink Tank(s).
WARNING! Use proper procedure to
replace Ink Tank(s) to avoid damage.
See “Replacing the Ink Tanks” section.
Press the “Replace Ink Tanks” button,
then verify that Ink Tanks are seated
firmly and latches are fully closed.
Verify that the printer is on a stable
surface and Print Engine is level.
Try to clear the error by pressing
the “Refresh Ink Levels” button,
located in the Toolbox.
If problem continues with a known
good Tank; clean/replace the Ink Level
PCA (Sensor Board).
MAINTENANCE_BUSY
Printer is performing
maintenance. No action is required. Wait for printer
to finish.
Printer is waiting to
perform maintenance;
if error is shown in
combination with
“Reason: Uncapped
printhead or clamshell
open"
and there is no
maintenance activity
(noise) coming from
printer.
Remove media from print engine. See
“Paperpath_Paperjam” solutions.
If problem continues clean Paperpath
Entry and Exit sensors.
If problem continues check/test/replace
sensor(s).
CARTRIDGE_MISSING_X
X = Color or MULTI
Missing Ink Tank, or Ink
Tank not being
recognized Replace Ink Tank(s) using proper
procedure.
Insert missing Ink Tank.
Clean Ink Tank contacts as outlined in
“Operator Maintenance” section.
Clear error by pressing the “Refresh Ink
Levels” button in the Toolbox.
Clean Ink Tank contacts located at the
back of the Ink Tank slot.
If problem continues with known good
Tank, then replace the ink tank
interface board (board that makes
contact with Tank inside the printer).