Memjet AS-1180C, Руководство по обслуживанию

Страница: 103 / 181

SECTION 4
DISASSEMBLY AND ASSEMBLY
101
Replacing Buffer Boxes (3 per machine)
[A] Each Buffer Box is held in place by (2) screws
accessed through the Ink Tank Station. Using a long
Phillips screwdriver, remove the screws and pull up on the
box to remove it from the Chassis.
[B] If necessary, remove
Tubing Inserts (2)
from the
used Buffer Box and insert
into the new Buffer Box.
NOTE: One or both
inserts may stay on the
Print Engine or in the
Buffer Box; simply make
sure you have both. Put
each one in the same color
chamber it came from, ie,
blue to blue, black to black, etc.
[C] Push new Buffer Box down onto the ink ports. Attach
with (2) screws from inside Ink Tank Station.
Replacing QA Chip Assembly (3 per machine)
[A] Each QA Chip Assembly is held in place by (1) screw
accessed through center of the Chip Assembly. Unplug wire
harness from Printed Circuit Boards.
[B] Remove the mounting screw.
Install in reverse order. NOTE: Make sure wire harnesses
are plugged into correct Printed Circuit Board.
Buffer Boxes and QA Chip Assemblies