MELAG Euroklav 29 VS+, Руководство пользователя

Страница: 34 / 60

Chapter 5
– Logging
34

Navigate with the
KEY
(+) or (-) until on the display
キノウ:
ハ゛ッチノ シュツリョク
is shown and press the
KEY
(P).

Navigate with the
KEY
(+) or (-) until on the display the
submenu
タタ゛チニ シュツリョクスル ハイ/イイエ
is
shown.

Press the K
EY
(P), in order to switch between
タタ゛チニ シュツリョクスル イイエ
and
ハイ.

In order to output logs immediately,
タタ゛チニ
シュツリョクスル ハイ
must be set.
In order to save the setting and to leave the menu again, press
the K
EY
(S). The display shows
キノウ: ハ゛ッチノ
シュツリョク.

By again pressing the K
EY
(S), you leave the menu
completely and return back to the initial state.
NOTICE
If it is not possible to output a log report for the immediate output
because for example the activated output medium is not
connected, a warning message appears. MELAG recommends
that you employ the immediate output of logs.
Output the logs subsequently
You also have the option of outputting the logs subsequently
and independently from the time of the end of the program. You
can select whether selected or all saved logs (up to 40 logs)
should be printed.
For this, use the connected output medium, e.g. the log printer.
Print selected logs In order to subsequently print selected logs of certain programs,
proceed as follows:

Select the SETUP Menu
キノウ
by short simultaneous
pressing of the keys (+) or (-). The display shows
キノウ:
サイコ゛ノ ハ゛ッチナンハ゛ｰ.

Navigate with the
KEY
(+) or (-) until on the display
キノウ:
ハ゛ッチノ シュツリョク
is shown and press the
KEY
(P).

The Menu
ハ゛ッチノ シュツリョク – シュツリョク
ハ゛イタイ
is displayed.

Navigate with the K
EY
(+) or (-) until the display
サイコ゛ノ サイクルヲ シュツリョクスル: No. 40
is
shown (as example No. 40).

Press the K
EY
(P). The current report number blinks.

In order to output a log of another cycle, navigate with the
KEYS
(+) or (-) up to the desired number, here e.g. 25.

Press the K
EY
(P) in order to start the output of the selected
program. The display shows
Output
.
After finished printout, the display changes again to its previous
setting
サイコ゛ノ サイクルヲ シュツリョクスル : No. 25
.

In order to output additional logs, repeat the last three
steps.

In order to leave the submenu without outputting, press
the K
EY
(S).

In order to leave the menu after the output, press the K
EY
(S). The display shows the menu
キノウ: ハ゛ッチノ
シュツリョク.

By again pressing the K
EY
(S), you completely leave the
menu and return back to the basic position of the display.
サイコ゛ノ サイクルヲ
シュツリョクスル No. 25