MELAG Euroklav 29 VS+, Руководство пользователя

Страница: 31 / 60

Chapter 5
– Logging
31
the display
キノウ: ヒツ゛ケ / シ゛コク
are displayed.

Press the K
EY
(P) in order to confirm. The current hour is
displayed.

Select between the following setting possibilities with the
K
EY
(+) or (-): Hour, minute, second Day, month, year

In order to adjust the
hour
parameter, press the K
EY
(P) for
the confirmation.
The current value on the display blinks.

The value can be increased or reduced with the
KEYS
(+)
and (-).

In order to store the value, confirm with the K
EY
(P).
The current preset value on the display no longer blinks
In order to adjust the other parameters, proceed analogously.

After finishing the settings, press the K
EY
(S) in to leave the
menu
On the display, the
キノウ: ヒツ゛ケ / シ゛コク
are again
displayed
By pressing the key (S) again you leave the menu completely
and the display again shows its starting position.
Use printer as output medium
If you want to employ the log printer MELA print 42 as the output
medium, connect it to the steam sterilizer as follows:
Data connection
from the steam sterilizer
Open the white cover of the serial data- and printer connection
(see page 10,
Fig. 1/ (6) ):

Turn a coin by a quarter-revolution inserted in the locking
slot (1) on the white cover.

Take cover off and fold the interior metal casing to the left.

Press the metal casing somewhat downwards until it
engages and no longer can automatically flip back.

Connect the cables of the log printer to the printer
connection at the steam sterilizer.
If the printer or a computer is continually connected to the steam
sterilizer, the data connection cable of the log printer is laid in
the cable ducts (2), the metal casing retracted and the cover is
closed again. This provides a comfortable external cable
connection to the printer.
Close the log printer MELA print 42 according to the pertinent
operating manual.
Connect printer
Initialisation of the log printer
MELA print 4 2
In order to be able to print out logs on the connected log printer,
you must initialise MELA
print 42 once by making the following
setting at the steam sterilizer:

If the steam sterilizer is still not switched on, switch it on.

Wait until the display shows the basic settings
(page 12,
Control Panel )

Select the SETUP Menu
キノウ
by short simultaneous
pressing of the
KEYS
(+) and (-). The display shows
キノウ:
サイコ゛ノ ハ゛ッチナンハ゛ｰ.

Navigate with the
KEY
(+) or (-) until the display
キノウ:
1
2