5.7 Extended Configuration via Telnet
As soon as the network parameters of the ANZ14 module are correctly set, you can start configuring the unit
by using a standard Telnet client. All you need to know is the IP address of the ANZ14 module and the correct
access password.
The default password is
meinberg
.
You need to connect to port 9999 of the module, so please start a telnet session with the IP address of
the unit and port 9999 (Example for invoking a telnet client: "C:/> telnet 192.168.0.1 9999").
Please note: Telnet sessions are always unencrypted, even the password is transmitted in plain text. It is
highly recommended to only connect to the module via Telnet in a secure, separated network in order to avoid
a network sniffer to find out your password. The safest method is to directly connect a laptop with a crosslink
cable and use this laptop to configure the unit.
The changes made during the Telnet session are activated after you left the setup with Menu Option 9 (Save
and Exit). Only in this case the parameters are stored permanently and the module is restarted.
After you initiated a Telnet connection with the ANZ14, you are presented the Welcome message and have
to enter the access password. If the password has been entered correctly, you have to press enter again to start
the setup tool:
*** Meinberg XPort Display ***
MAC address 00204A80FBC3
Software version V0451 (090417) CPK6101_XPTEX
Password: ********
Press Enter for Setup Mode
*** NTP Display V1.01
Meinberg Funkuhren ***
Hardware
: Ethernet TPI
NtpDisp IP addr
: 172.16.3.234, gateway 172.16.3.1, netmask 255.255.0.0
NTP Time Server IP 1
: 172.16.3.235
NTP Time Server IP 2
: — not set —
NTP Time Server IP 3
: — not set —
Display delay time [+/-ms]
: 0
NTP client stratum [1-15]
: 10
Time Zone Daylight on
: Sun after 25.03 at 02:00 UTC +120min
Time Zone Daylight off
: Sun after 25.10 at 03:00 UTC +60min
SNMP community name for read: public
SNMP community name for write
: public
SNMP manager IP address 1
: — not set —
SNMP manager IP address 2
: — not set —
SNMP manager IP address 3
: — not set —
SYSLOG is disable Server IP
: — not set —
Change Setup:
0 Server configuration
5 Time Zone configuration
1 Security configuration
6 NTP client configuration
2 SNMP configuration
7 factory defaults
3 SYSLOG configuration 8 exit without save
9 save and exit
Your choice ?
Now you can choose which parameter you want to change by entering a number and press RETURN. Here is
a description of the available Menu Options:
20
Date: 28th October 2019
ANZ14/ANZ14DCF/ANZ14NET
Содержание ANZ14
Страница 2: ......