5.3 Error-Code
Whenever one of the below listed errors occurs, a corresponding numerical error code is displayed in the second
line instead of the date. This error code is displayed as long as the fault cause exists, provided that the debug
mode is enabled (see Setup Menu -> Debug Mode). Otherwise an error is indicated only by the dot behind
the last digit in the first Line.
The following error codes are possible:
Er. 00
internal error
Er. 01
no answer from NTP
Er. 02
NTP not synchronized
Er. 03
NTP stratum > stratum of ANZ14
Er. 04/05
for debugging only
5.4 Network Configuration
To identify the ANZ14 in the network it is neccessary to set the unique 32 bit TCP/IP address by the network
administrator. Now configuration is possible by using a Telnet connection via ethernet. Initialization of the
TCP/IP address for the first time may occur by two different ways: the network parameters are either given
automatically by a DHCP server or set manually by the below described ARP method.
18
Date: 28th October 2019
ANZ14/ANZ14DCF/ANZ14NET
Содержание ANZ14
Страница 2: ......
